Возврат к шагу #11
Отредактированно Josh Wright -
Правка одобрена автор Josh Wright
- До
- После
- Без изменений
Шаг Линий
| - | [* black] Insert the new Processor |
|---|---|
| - | [* black] Twist the screw Clockwise Back into its original position (So the black point is pointing right) |
| - | [* black] Use isopropyll to clean the processor is necessary |
| - | [* black] Open up the thermal Compound and apply it to the shiny reflective part of the new processor ( Do not use lots only a little is needed but ensure that the whole of it is covered) |
| + | [* black] Insert the new Processor. |
| + | [* black] Twist the screw Clockwise Back into its original position (So the black point is pointing right). |
| + | [* black] Use isopropyll to clean the processor is necessary. |
| + | [* black] Open up the thermal Compound and apply it to the shiny reflective part of the new processor ( Do not use lots only a little is needed but ensure that the whole of it is covered). |
| [* black] It should look just about like the second Photo but it will differ in colour and positioning. |