Изменения к шагу №6
Отредактированно Jake Devincenzi -
Правка одобрена автор Jake Devincenzi
- Удален
- Добавлено
- Без изменений
Шаг Линий
| [* icon_note] In this step, you will use the rotary tool to make a thin cut in the stripped screw that enables you to use a flathead screwdriver to remove the screw. [* icon_note] We recommend using a low power setting (we used 2 out of 6) to prevent damaging the rest of the device or the screw. [* icon_note] You want the cut to be deep enough that you can fit a flathead screwdriver into it, but thin enough that the screwdriver has something to grip. [* black] |
| [* icon_note] In this step, you will use the rotary tool to make a thin cut in the stripped screw that enables you to use a flathead screwdriver to remove the screw. [* icon_note] We recommend using a low power setting (we used 2 out of 6) to prevent damaging the rest of the device or the screw. [* icon_note] You want the cut to be deep enough that you can fit a flathead screwdriver into it, but thin enough that the screwdriver has something to grip. [* black] |