Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #7

Редактировать с помощью Jake Devincenzi -

Правка одобрена автор Jake Devincenzi

До
После
Без изменений

Шаг Линий

[* black] Use a flathead screwdriver (theto remove the screw from the device.
[* icon_note] The
size of the driver depends on the size of the screw, but use the largest size that will fit in your cut) to remove the screw from the devicecut.
[* icon_note] If you cannot fit a screwdriver into the cut, use the rotary tool to make the cut larger. Make only small cuts—ifcuts;if you cut off too much of the screw, a screwdriver will not catch and you will not be able to twist the screw.
[* black] Use a flathead screwdriver (theto remove the screw from the device.
[* icon_note] The
size of the driver depends on the size of the screw, but use the largest size that will fit in your cut) to remove the screw from the devicecut.
[* icon_note] If you cannot fit a screwdriver into the cut, use the rotary tool to make the cut larger. Make only small cuts—ifcuts;if you cut off too much of the screw, a screwdriver will not catch and you will not be able to twist the screw.