Перейти к основному содержанию

Изменения к шагу №7

Отредактированно Walter Galan -

Правка одобрена автор Walter Galan

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Use a flathead screwdriver to remove the screw from the device.
[* icon_note] The size of the driver depends on the size of the screw, but use the largest size that will fit in your cut.
[* icon_note] If you cannot fit a screwdriver into the cut, use the rotary tool to make the cut larger. Make only small cuts;ifcuts; if you cut off too much of the screw, a screwdriver will not catch and you will not be able to twist the screw.
[* icon_note] If you cannot fit a screwdriver into the cut, use the rotary tool to make the cut larger. Make only small cuts;ifcuts; if you cut off too much of the screw, a screwdriver will not catch and you will not be able to twist the screw.