Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #12

Редактировать с помощью mwarrenus -

Правка одобрена автор Evan Noronha

Без изменений

Шаг Линий

[* red] The back of the motherboard hosts a [http://www.panasonic.com/industrial/electronic-components/rf-modules/bluetooth/pan1326-1316.aspx|Panasonic pan1316 RF module|new_window=true], promising the Pebble's [http://getpebble.com/#customize-with-coding|advertised|new_window=true] Bluetooth and Bluetooth Low Energy (BLE) functionality, powered by a Texas Instruments CC2564 Bluetooth Controller.
[* orange] After some dainty desoldering, the module's EMI shield is removed to surprisingly reveal a slightly different [http://www.ti.com/lit/ds/symlink/cc2560.pdf|Texas Instruments CC2560A|new_window=true], that [http://guide-images.ifixit.net/igi/LwajShMkmY1VprEK|appears to not include BLE support|new_window=true].
[* black] The Bluetooth antenna printed on the flex circuit board connects to the module here.
[* black] [http://www.itworld.com/mobile-wireless/347911/pebble-watch-review-three-days-cool-wrist-vibrations|Word on the street|new_window=true] was that Pebble had BLE functionality just waiting to be activated with a firmware update, but we can't find evidence of the hardware to back up this hidden potential.
[* icon_note] '''Update:''' Pebble assures us that the update will be forthcoming, and explained that TI uses the same silicon for both the CC2560 and CC2564 parts—so despite the label on the chip, the update will make this a CC2564 with BLE support.

Изображение 1

Старая версия

Новая версия