Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #1

Редактировать с помощью elitree -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Remove the following 10 screws securing the lower case to the MacBook Pro 13" Unibody:
[* red] Seven 3 mm Phillips screws.
[* orange] Three 13.5 mm Phillips screws.
[* black] Note the angle of the different screws, so that they may be reinserted at the correct angle after the repair is done:
[* black] Six of the seven 3mm screws are screwed in at an angle approximating the curve of the housing.
[* black] The 3mm screw at the rear of the unit (next to the 13.55 mm screws) is screwed in flat, as are the 13.55 mm screws.