Перейти к основному содержанию

Возврат к шагу #1

Редактировать с помощью Adam O'Camb -

Правка одобрена автор Adam O'Camb

До
После
Без изменений

Шаг Линий

[title] Remove the speaker adhesive
[* black] Use a pair of tweezers to lift up the black adhesive pull tab at the bottom of the speaker, enough so you can grab it with your fingers.
[* black] Grab the adhesive strip pull tab and slowly and carefully pull the adhesive strip out from under the speaker.
- [* icon_note] Keep the angle of the adhesive strip as parallel to the laptop as you can, without dragging it across the inside of the case.
+ [* icon_note] Keep the angle of the adhesive strip as parallel to the laptop as you can. Try to avoid dragging it across the inside of the case.
[* black] If the adhesive strip breaks, leave it in and proceed to the next step.