Перейти к основному содержанию

Возврат к шагу #3

Редактировать с помощью Arthur Shi -

Правка одобрена автор Arthur Shi

До
После
Без изменений

Шаг Линий

[* black] Use tweezers to lift the adhesive pull tab at the top of the speaker enough that you can grab it with your fingers.
[* black] Grab the adhesive strip pull tab and slowly and carefully pull the adhesive strip out from under the speaker.
[* icon_note] Keep the angle of the adhesive strip as parallel to the laptop as you can. Try to avoid dragging it across the inside of the case.
-[* black] If the adhesive strip breaks, or if the first adhesive strip broke, use a [guide|25705|heated iOpener|new_window=true] or heat gun to help remove the adhesive:
+[* icon_note] If the adhesive strip breaks, or if the first adhesive strip broke, use a [guide|25705|heated iOpener|new_window=true] or heat gun to help remove the adhesive:
[* black] Apply heat to the speaker to soften the adhesive underneath.
[* black] Carefully slide a spudger or opening pick underneath the speaker to separate the adhesive.