Перейти к основному содержанию

Возврат к шагу #6

Редактировать с помощью Oliver Myers -

Правка одобрена автор Oliver Myers

До
После
Без изменений

Шаг Линий

[* black] Remove the hose clamps and set them aside for laterfrom the damaged line. Straighten the used line out and place it alongside the new hose, then cut a piece the same length with the hose cutter (a sharp knife will also work fine).
[* black] Place the hose clamps on the new hose. There is no need to replace the old hose clamps.
[* black] Remove the hose clamps and set them aside for laterfrom the damaged line. Straighten the used line out and place it alongside the new hose, then cut a piece the same length with the hose cutter (a sharp knife will also work fine).
[* black] Place the hose clamps on the new hose. There is no need to replace the old hose clamps.