Перейти к основному содержанию

Изменения в этом шаге

Редактировать с помощью Oliver Myers -

Правка одобрена автор Oliver Myers

До
После
Без изменений

Шаг Линий

[* black] Locate the two bumps on one of the main lines, and the single bump on the other main line.
[* black] Slide the new hose onto the main lines. Ensureline at the side going onpressure relief valve. Make sure the Pressure Relief linehose goes at least the width of the hose clamp past the bump.
[* black] Slide the new hose onto the main lines. Ensureline at the side going onpressure relief valve. Make sure the Pressure Relief linehose goes at least the width of the hose clamp past the bump.