Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #1

Редактировать с помощью Walter Galan -

Правка одобрена автор Walter Galan

До
После
Без изменений

Шаг Линий

[* icon_note] You will be using an iOpener to transfer heat to the adhesive securing the home button assembly to the front glass panel assembly.
[*
black] Insert wisdom hereReheat the iOpener in the microwave for one minute on the highest power setting.
[* black] Lay the iOpener flat on the front side, near the bottom edge of the front glass panel assembly, smoothing it out so that there is good contact between the surface of the front glass panel assembly and the iOpener.
[* black] Let the bag sit on the front glass panel assembly for approximately 90 seconds before attempting to open the front panel
.
[* icon_note] You will be using an iOpener to transfer heat to the adhesive securing the home button assembly to the front glass panel assembly.
[*
black] Insert wisdom hereReheat the iOpener in the microwave for one minute on the highest power setting.
[* black] Lay the iOpener flat on the front side, near the bottom edge of the front glass panel assembly, smoothing it out so that there is good contact between the surface of the front glass panel assembly and the iOpener.
[* black] Let the bag sit on the front glass panel assembly for approximately 90 seconds before attempting to open the front panel
.