Перейти к основному содержанию

Возврат к шагу #2

Редактировать с помощью Jeff Dickson -

Правка одобрена автор Jeff Dickson

Без изменений

Шаг Линий

+[* black] Once you've removed the LCD display from the device you can see what you're in for.
+[* red] The logic board is outlined here in red. We have to remove it completely since the video card is installed on the backside. Before we do that, we have to carefully separate 17 connectors.
+ [* orange] You can see parts of the graphics card highlighted in orange. The GPU is on the right and the dedicated heat fins are on the left, located just "downwind" of the CPU heat fins.
+[* yellow] AFTER we disconnect all the wires, you need to also remove the right speaker enclosure since it covers the corner of the logic board. It's retained with one obvious screw.

Изображение 1

Нет предыдущего изображения