Перейти к основному содержанию

Возврат к шагу #7

Редактировать с помощью brentp -

Правка одобрена автор Andrew Optimus Goldheart

До
После
Без изменений

Шаг Линий

-[* black] Wires done. Now to get unscrewed. There are ten torx screws holding the logic board to the case in three different sizes:
- [* red] Long ones
- [* orange] Short ones with with a wide pitch
- [* yellow] A short one with a narrow pitch
+[* black] Wires done. Now to get unscrewed. There are ten T-10 torx screws holding the logic board to the case in three different sizes:
+ [* red] Long ones (2.5mm x 24mm)
+ [* orange] Short ones (2.5mm x 7mm)
+ [* yellow] A short one with a fine thread (2.5mm x 7mm)