Перейти к основному содержанию

Возврат к шагу #8

Редактировать с помощью Jeff Dickson -

Правка одобрена автор Jeff Dickson

До
После
Без изменений

Шаг Линий

-[* black] If you haven't done so already, remove the right-hand speaker assembly by loosening a single screw.
-[* black] Now you're ready to simply lift out the logic board while keeping a careful eye on all those wires you just disconnected. The heatsink fins are attached to the logic board.
+[* black] If you haven't done so already, remove the speaker assembly on the right by loosening a single screw.
+[* black] Now simply lift out the logic board while keeping a careful eye on all those wires you just disconnected. The heatsink fins are attached to the logic board and lift out with it.