Перейти к основному содержанию

Возврат к шагу #10

Редактировать с помощью brentp -

Правка одобрена автор Andrew Optimus Goldheart

До
После
Без изменений

Шаг Линий

-[* red] The graphics card is retained by two torx screws on the GPU board...
-[* orange] a third screw on the end of the heat sink...
+[* red] The graphics card is retained by two T-9 (2mm x 5mm) torx screws on the GPU board...
+[* orange] a third T-9 (2mm x 4mm) screw on the end of the heat sink...
[* yellow] and the ever-present thermal sensor connector.
[* black] Remove/disconnect them all.