Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Изменения в этом шаге

Редактировать с помощью Jeblank -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] To remove the main board, disconnect 5 connectors (4 black ribbons, 1 orange) with a flat tool.
[* yellowred] The 4 black ribbons are located along the borders on the upper half of the motherboard.
[* redorange] The orange cable is connected to the motherboard similarly to the white WiFi cable in the previous step. Use a spludger and pry up.
[*

[*
icon_note] The last black ribbon on bottom is not removed until the last step.
[* yellowred] The 4 black ribbons are located along the borders on the upper half of the motherboard.
[* redorange] The orange cable is connected to the motherboard similarly to the white WiFi cable in the previous step. Use a spludger and pry up.
[*

[*
icon_note] The last black ribbon on bottom is not removed until the last step.

Изображение 1

Старая версия

Новая версия