Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Изменения в этом шаге

Редактировать с помощью bushing -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] To removered] If you have not already done so, disconnect the two bottom-LCD ribbon cables from the main board, disconnect 5 connectors (4board by prying up the black ribbons, 1 orange) with a flat toollatches and pulling the cable out to the side.
[* redicon_caution] The 4 black ribbons are located alongribbon cable (marked in blue) for the borders ontouch screen is particularly thin and fragile; be careful to avoid bending it more than necessary.
[* blue] Flip up
the upper half oflatch and remove the motherboardtouch screen cable.
[* yellow] Flip up the latch and remove the top-screen ribbon cable
.
[* orange] ThePry up on the orange cable is connected to disconnect it from the motherboard similarly tomain board, much like the white WiFiantenna cable inon the previous step. Use a spudger and pry upWi-Fi module.
[* icon_note] There isYou will remove one more black ribbon cable on the other side of the main board which you'll remove onin the lastnext step.
[* black] To removered] If you have not already done so, disconnect the two bottom-LCD ribbon cables from the main board, disconnect 5 connectors (4board by prying up the black ribbons, 1 orange) with a flat toollatches and pulling the cable out to the side.
[* redicon_caution] The 4 black ribbons are located alongribbon cable (marked in blue) for the borders ontouch screen is particularly thin and fragile; be careful to avoid bending it more than necessary.
[* blue] Flip up
the upper half oflatch and remove the motherboardtouch screen cable.
[* yellow] Flip up the latch and remove the top-screen ribbon cable
.
[* orange] ThePry up on the orange cable is connected to disconnect it from the motherboard similarly tomain board, much like the white WiFiantenna cable inon the previous step. Use a spudger and pry upWi-Fi module.
[* icon_note] There isYou will remove one more black ribbon cable on the other side of the main board which you'll remove onin the lastnext step.

Изображение 1

Старая версия

Новая версия