Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Изменения в этом шаге

Редактировать с помощью rwong05 -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] To remove the main board, disconnect 6 connectors (topside: 4 black ribbons, 1 orange; bottom: 1 black ribbon) with the spudgera flat tool.
[* black] To remove the main board, disconnect 6 connectors (topside: 4 black ribbons, 1 orange; bottom: 1 black ribbon) with the spudgera flat tool.
[* yellow] The 4 black ribbons are located along the borders on the upper half of the motherboard.
[* red] The orange cable is connected to the motherboard similarly to the white WiFi cable in the previous step. Use a spludger and pry up.