Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Изменения в этом шаге

Редактировать с помощью rwong05 -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] To remove the main board, disconnect 5 connectors (4 black ribbons, 1 orange) with a flat tool.
[* red] The 4 black ribbons are located along the borders on the upper half of the motherboard.
[* orange] The orange cable is connected to the motherboard similarly to the white WiFi cable in the previous step. Use a spludgerspudger and pry up.
[* icon_note] The lastThere is 1 more black ribbon on bottom is not removed untilthe other side of the board which you'll remove on the last step.
[* orange] The orange cable is connected to the motherboard similarly to the white WiFi cable in the previous step. Use a spludgerspudger and pry up.
[* icon_note] The lastThere is 1 more black ribbon on bottom is not removed untilthe other side of the board which you'll remove on the last step.