Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Изменения в этом шаге

Редактировать с помощью Miroslav Djuric -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] To remove the main board, disconnect 5 connectors (4 black ribbons, 1 orange) with a flat tool.
[*[* red] The 4 black ribbons are located along the borders on the upper half of the motherboard.
[*

[*
orange] The orange cable is connected to the motherboard similarly to the white WiFi cable in the previous step. Use a spudger and pry up.
[*

[*
icon_note] There is 1one more black ribbon on the other side of the board which you'll remove on the last step.
[*[* red] The 4 black ribbons are located along the borders on the upper half of the motherboard.
[*

[*
orange] The orange cable is connected to the motherboard similarly to the white WiFi cable in the previous step. Use a spudger and pry up.
[*

[*
icon_note] There is 1one more black ribbon on the other side of the board which you'll remove on the last step.