Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #1

Редактировать с помощью Jeblank -

На одобрении

До
После
Без изменений

Шаг Линий

[* black] Remove 4 Philips screws from the board.
[* red] Three are located on the left side of the device and the fourth is by the top right corner.
[* black] Then, lift the main board from the bottom end and flip it over to reveal the last connector.
[* icon_caution] Keep the motherboard fairly close making sure not to damage the last connection.connector
[* icon_caution] Keep the motherboard fairly close making sure not to damage the last connection.connector