Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #1

Редактировать с помощью Miroslav Djuric -

На одобрении

До
После
Без изменений

Шаг Линий

[* blackred] Remove 4 Philips screws from the board.
[* red] 3 are located on the left side of the board and the 4th is by the top right corner.

[* black] Then, liftLift the main board from the bottom end and flip it over to reveal the last connector.
[* icon_caution] Keep the motherboard fairly close, making sure not to damage the last connector holding it in place.
[* blackred] Remove 4 Philips screws from the board.
[* red] 3 are located on the left side of the board and the 4th is by the top right corner.

[* black] Then, liftLift the main board from the bottom end and flip it over to reveal the last connector.
[* icon_caution] Keep the motherboard fairly close, making sure not to damage the last connector holding it in place.
[* icon_caution] Keep the motherboard fairly close, making sure not to damage the last connector