Возврат к шагу #17
Отредактированно Tarun Thiruma -
Правка одобрена автор Tarun Thiruma
- До
- После
- Без изменений
Шаг Линий
| [* black] This isn't your grandmother's trigger button. Let's take a closer look at all the moving parts: | |
| [* red] Buttons! R1 on the left and R2 on the right. R2 seems to use the same analog-type sensor as the Dualsense's d-pad, while R1 is just a plain Jane digital switch. | |
| [* orange] Plastic frame, metal pin and spring for R2 trigger action | |
| [* yellow] Gear system. White worm gear (from green bullet) spins the circular gear, which drives the arm up to resist R2's lever action. | |
| - | [* green] Gear housing. Silver motor drives the worm gear. |
| - | [* light_blue] |
| + | [* green] Gear housing. Silver motor drives the worm gear. Its leads are soldered to the trigger module board. |
| + | [* light_blue] Trigger module board. 2 ribbon cable connections (one to buttons, one to main board). The black encoder measures the rotation of the circular gear from yellow bullet. |