Почините Свои Вещи Сообщество Магазин

Возврат к шагу #1

Отредактированно Walter Galan -

На одобрении

До
После
Без изменений

Шаг Линий

-[* black] Flip the PlayStation 2 so that the bottom of the device is facing up.
-[* black] Using a metal spudger, pry the 8 flat screw covers out.
-[* black] Remove the following 8 screws:
- [* red] Four 55.4 mm Philips screws.
- [* green] Four 18 mm Phillips screws.
+[* icon_note] Flip the PlayStation 2 over so it lays with the bottom of the device facing upwards.
+[* black] Use the flat edge of a metal spudger to pry the eight flat screw covers out.
+[* black] Remove the following eight screws securing the top cover to the bottom case:
+ [* red] Four 55.4 mm Philips screws
+ [* green] Four 18.0 mm Phillips screws