Перейти к основному содержанию

Изменения к шагу №1

Отредактированно Joseph Goodwin -

Правка одобрена автор Joseph Goodwin

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Locate the microphone component on your Lyra X2400. If you are having difficulty locating this component the logic board sopicture to the left will shoe you may begin desolderingwhere it is located.
[* black] Start using solder/desolder tools to remove the microphone.
[* black] Once removed replace it with the new working microphone.
[* black] Use the soldering tools to reattach
the electrical component in orderback to replace itthe main logic board.
[* black] Locate the microphone component on your Lyra X2400. If you are having difficulty locating this component the logic board sopicture to the left will shoe you may begin desolderingwhere it is located.
[* black] Start using solder/desolder tools to remove the microphone.
[* black] Once removed replace it with the new working microphone.
[* black] Use the soldering tools to reattach
the electrical component in orderback to replace itthe main logic board.

Изображение 1

Нет предыдущего изображения

Добавлено