История iPhone 12 mini Battery Replacement Шага #2

Возврат к шагу #2

Отредактированно iRobot - 16 мая 2024 г.

Правка одобрена автор iRobot

	[* black] Grab the pull tab with your fingers and ''slowly'' pull it away from the battery, toward the bottom of the iPhone.
	[* black] Pull hard enough to maintain tension on the strip, but don't force it. Give it plenty of time to stretch and un-stick from under the battery.
	[* black] Don't press down on the battery. Hold the iPhone firmly by its sides.
	[* black] Keep the strip flat and unwrinkled. Try to pull evenly on the whole strip, rather than pulling mainly in the middle or on one side.
	[* black] Pull at a low angle so the strip doesn't snag on the edge of the battery.
-	[* black] If the adhesive strip breaks off, try to retrieve it using your fingers or ~~blunt~~ [product\|IF145-020\|tweezers], and continue pulling—but *do not* pry under the battery.
+	[* black] If the adhesive strip breaks off, try to retrieve it using your fingers or [product\|IF145-020-4\|blunt tweezers], and continue pulling—but *do not* pry under the battery.
	[* icon_caution] If any of the adhesive strips break off underneath the battery and can't be retrieved, try to remove the other strips, and then proceed as instructed below.