Возврат к шагу #6
Отредактированно Michael Ratcliffe -
Правка одобрена автор Zephosk
- До
- После
- Без изменений
Шаг Линий
| [title] Remove the battery bracket | |
| [* red] Unplug the side WiFi antenna. See [guide|25629|step 5 of the RDCC guide|stepid=64972|new_window=true]. To disconnect the cable, slide a thin, ESD-safe pry tool or [product|IF145-020|tweezers] under the metal neck of the connector and lift straight up from the board. | |
| - | [* orange] Remove the |
| - | [* yellow] Remove the two 2.3 mm |
| + | [* orange] Remove the 4.4 mm P000 screw |
| + | [* yellow] Remove the two 2.3 mm P000 screws |