Перейти к основному содержанию

Возврат к шагу #5

Редактировать с помощью Walter Galan -

На одобрении

Без изменений

Шаг Линий

-[* icon_reminder] If you utilize your expansion bay for its intended purpose, make sure you remove the component now.
-[* black] Remove the cover for the expansion bay.
-[* black] Pull the ''innards'' out and away from the bottom cover.
-[* black] Now that all of that bulky plastic is out of the way, we can get to the fun stuff - electronics!
-[* red] Let's begin by removing the four 7.6 mm Phillips head gold screws holding on the power supply board.
+[* icon_caution] If there is a device occupying the expansion bay, make sure to remove the device. The expansion base should be ***empty***.
+[* black] Pry and remove the expansion bay cover away from its posts on the bottom case.

Изображение 2


Изображение 3