Перейти к основному содержанию

Возврат к шагу #5

Редактировать с помощью bushing -

На одобрении

До
После
Без изменений

Шаг Линий

[* icon_reminder] If you utilize your expansion bay for its intended purpose, make sure you remove the component now.
[* black] Remove the cover for the expansion bay.
-[* black] Pull the ''inards'' out and away from the bottom cover.
+[* black] Pull the ''innards'' out and away from the bottom cover.
[* black] Now that all of that bulky plastic is out of the way, we can get to the fun stuff - electronics!
[* red] Let's begin by removing the four 7.6 mm Phillips head gold screws holding on the power supply board.