Перейти к основному содержанию

Изменения к шагу №7

Отредактированно Andrew Optimus Goldheart -

Правка одобрена автор Andrew Optimus Goldheart

Удален
Добавлено
Без изменений

Шаг Линий

[* black] Use a heat gun toor hair dryer to soften the adhesive under the black strip along the left side of the front glass panel.
[* icon_note] You can alternatively use a hair dryer instead to soften the adhesive. The recommended temperature for heat is 60-90°C. A hair dryer is 60°C for reference.
[* black] Use a heat gun toor hair dryer to soften the adhesive under the black strip along the left side of the front glass panel.
[* icon_note] You can alternatively use a hair dryer instead to soften the adhesive. The recommended temperature for heat is 60-90°C. A hair dryer is 60°C for reference.
[* black] Attach a suction cup along the left side of the front glass panel.
[* black] Pull up on the glass panel while you use the flat end of a spudger to separate it from the rest of the display assembly.
[* black] Continue working along the left edge of the front display glass until it is separated from the display.