Перейти к основному содержанию

Возврат к шагу #17

Отредактированно Faraz Rashid -

Правка одобрена автор Faraz Rashid

До
После
Без изменений

Шаг Линий

-[* black] Using a flat tool unclip the cable from the circuit and begin to remove any tape securing any cables. Lastly, unscrew the single screw on the bottom right of the power input to remove the cable.
+[* black] Using a flat tool unclip the cable from the circuit and begin to remove any tape securing any cables.
+[* black] Lastly, unscrew the single screw on the bottom right of the power input to remove the cable.