Возврат к шагу #17
Отредактированно Faraz Rashid -
Правка одобрена автор Faraz Rashid
- До
- После
- Без изменений
Шаг Линий
| [* black] Using a flat tool unclip the cable from the circuit and begin to remove any tape securing any cables. | |
| - | [* black] Lastly, unscrew the single 1.5mm screw on the bottom right of the power input using the Phillips #00 screwdriver to remove the cable. |
| + | [* black] Lastly, unscrew the single 1.5mm Phillips #00 screw on the bottom right of the power input using the Phillips #00 screwdriver to remove the cable. |