Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Kyle Smith -

Правка одобрена автор Kyle Smith

До
После
Без изменений

Шаг Линий

[title] Disconnect the battery
-[* icon_note] The battery connector is attached to the underside of the display cable bracket.
-[* black] Insert the flat end of a spudger under the display cable bracket and lift up to disconnect the battery connector from the logic board.
+[* icon_note] The battery press connector is attached to the underside of the display cable bracket on the screw hole side.
+[* black] Insert the flat end of a spudger under the display cable bracket and lift up to disconnect the battery press connector from the logic board.
[* icon_caution] Don't try to remove the display cable bracket as it's attached to the battery by the battery cable.