Перейти к основному содержанию

Возврат к шагу #8

Редактировать с помощью Kyle Smith -

Правка одобрена автор Kyle Smith

До
После
Без изменений

Шаг Линий

[title] Remove the display assembly
[* black] Lift and remove the display assembly.
[* black] If you are replacing the display assembly adhesive, remove any remaining adhesive and residue from the perimeter of the device.
-[* icon_reminder] During reassembly, [guide|113604|follow this guide|new_window=true] if you are using a pre-cut adhesive card.
-[* icon_reminder] [guide|126585|Follow this guide|new_window=true] if you are using custom-cut adhesives for your device.
-[* icon_reminder] If you are replacing the display assembly, you will need to transfer the original home button to the new display assembly.
+ [* icon_reminder] During reassembly, [guide|113604|follow this guide|new_window=true] if you are using a pre-cut adhesive card.
+ [* icon_reminder] [guide|126585|Follow this guide|new_window=true] if you are using custom-cut adhesives.
+[* icon_reminder] If you are replacing the display assembly, you will need to [guide|143665|transfer the original home button|stepid=290603|new_window=true] to the new display assembly.