Перейти к основному содержанию

Возврат к шагу #9

Редактировать с помощью Kyle Smith -

Правка одобрена автор Kyle Smith

До
После
Без изменений

Шаг Линий

[title] Display reassembly information
-[* icon_reminder] If you are replacing the display assembly adhesive, remove any remaining adhesive and residue from the perimeters of the frame and the display assembly.
- [* red] Don't remove the tape on the left, right, and upper edges of the display. These are holding the electronic display to the glass screen.
-[* icon_reminder] During reassembly, [guide|113604|follow this guide|new_window=true] if you are using a pre-cut adhesive card.
-[* icon_reminder] [guide|126585|Follow this guide|new_window=true] if you are using custom-cut adhesives.
+[* icon_reminder] During reassembly, remove any remaining adhesive and residue from the perimeters of the frame and the display assembly. Then, apply new adhesive to secure the display assembly to the frame.
+ [* red] Don't remove the black tape on the left, right, and upper edges of the display. These are holding the electronic display to the glass screen.
+ [* icon_reminder] [guide|113604|Follow this guide|new_window=true] if you are using a pre-cut adhesive card. [guide|126585|Follow this guide|new_window=true] if you are using custom-cut adhesives.