Возврат к шагу #6
Отредактированно Adriana Zwink -
Правка одобрена автор Adriana Zwink
- До
- После
- Без изменений
Шаг Линий
| [* black] Using the same procedure as before, pull the remaining tab to stretch and remove the remaining adhesive strip holding the battery in place. Try not to snag the adhesive on anything. | |
| + | [* icon_note] If the adhesive breaks off underneath the battery and can't be retrieved, apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery in the area of the broken adhesive strip(s). |
| + | [* black] Wait about one minute for the alcohol solution to weaken the adhesive. |
| + | [* black] Use the flat end of a spudger to gently lift the battery. |
| + | [* icon_caution] Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool. |