Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Tom Lube -

Правка одобрена автор Tom Lube

До
После
Без изменений

Шаг Линий

-[* green] Remove the 8 screws highlighted here and gently run a spudger along the gray plastic.
-[* black] Gently pry all around the outside of the phone - where the gray plastic meets the glass - until the plastic backing separates off the device.
-[* icon_note] You might have to force it a little, but don't be too brutal on it.
+[* green] Remove the 8 screws highlighted.
+[* black] With the screws removed, push a spudger no more than a centimetre into the device.
+ [* black] Gently pry all around the outside of the phone where the gray plastic meets the glass of the display.
+[* black] The plastic backing will separate entirely from the device.
+[* icon_note] You might have to force it a little, but don't use too much or you risk damaging the plastic or the internal components.

Изображение 1

Старая версия

Новая версия