Перейти к основному содержанию

Возврат к шагу #4

Отредактированно Stashtree -

Правка одобрена автор Stashtree

До
После
Без изменений

Шаг Линий

+[* black] After pulling off the sole, I found the RGB LED light strip glued to the platform.
+[* black] The strip ran down the shank of the shoe and then wrapped around the shell containing the battery and board.
+[* black] This board shell in held in place under the sole in the box of the platform. The platic box was sealed with glue.
+[* black] Warning: It was difficult to remove the glue that sealed the shell. I could have punctured the battery. I didn't, but I don't plan on doing that again.