Возврат к шагу #7
Шаг Линий
| [title] Step 7 Removing the trigger caps | |
| [* black] Next we are gonna need to remove the trigger caps, for the next screws in this manual we need the torix 6 screw bit. | |
| [* black] Unscrew the little screw on the backsides of the caps and just gently push the platic around the trigger from the outside towards the inside | |
| - | [* |
| + | [* icon_note] Inside you see a little grey motor, this is your rumble motor, please always try to limit the strain on the cable . ( don't let them hang when picking up) |