Возврат к шагу #10
Отредактированно Ryn S -
Правка одобрена автор Repair Skeleton
- До
- После
- Без изменений
Шаг Линий
| [title] Removing the motherboard | |
| - | [* red] Next we remove the two screws in the bottom corners ( |
| + | [* red] Next we remove the two screws in the bottom corners (using T6 bit). Next we can lift the motherboard up. ***NOTE that the 3.5mm jack is not soldered and just sandwiched between the two boards.*** |
| [* icon_note] When assembling the device note that the multiple metal pieces on the 3.5mm go towards the motherboard. | |
| [* black] For removing the motherboard just simply lift it from one of the corners without bending it too much. (sorry the camera was out of focus) |