Почините Свои Вещи Сообщество Магазин

Возврат к шагу #11

Отредактированно Ryn S -

Правка одобрена автор Repair Skeleton

До
После
Без изменений

Шаг Линий

-[title] Step 11 Removing the daughter plate
-[* red] Now we remove the last six screws (still torx 6), after those you can lift the daugther board and ***make sure the buttons face ++Down++*** so you dont spill them all on the floor.
- [* icon_note] (And remove them before flipping the controller chassis.)
-[* icon_note] When replacing any buttons you just have to make sure it fits since the they only really fit on one place in one orientation.
+[title] Removing the daughter plate
+[* red] Now we remove the last six screws (still T6). After those you can lift the daughter board. The buttons will be loose after removing, so take care not to lose them.
+ [* icon_note] Remove the buttons before flipping the controller chassis
+[* icon_note] Buttons are keyed to ensure they are in the right position and orientation. Check placement if one doesn't seem to fit.