Возврат к шагу #1
Отредактированно Jonathan Beaudry -
Правка одобрена автор Jonathan Beaudry
- До
- После
- Без изменений
Шаг Линий
| - | [* black] |
|---|---|
| - | [* black] Once you have popped this section up, work on pulling the rest of this plastic piece up, working from left to right. Just using your hands to pull upward on the plastic will work. |
| + | [* black] To start, open the laptop so the display screen is bent fully back with the display facing upward, parallel to the surface you are working on. Using a Phillips #00 (flat-head) screwdriver above the F1 key, separate the plastic from the body of the laptop. |
| + | [* black] Don't worry about breaking it! You will need to forcefully wedge the screwdriver under the plastic, simultaneously pushing upward and forward. Once you have popped this section up, work on pulling the rest of this plastic piece up, working from left to right. Just using your hands to pull upward on the plastic will work. |