Возврат к шагу #2
Отредактированно Parker Sowersby -
Правка одобрена автор Parker Sowersby
- До
- После
- Без изменений
Шаг Линий
| + | [* black] Pull the wire that was once attached to the mainboard (detached in "main board guide") through the main body. |
|---|---|
| + | [* black] Use the tweezers to pull the 4 rubber camera holsters out of the body. |
| + | [* black] Using your J000 screw driver, unscrew the two remaining screws connecting the camera to the body. |