Перейти к основному содержанию

Возврат к шагу #6

Отредактированно Sarah Westberg -

Правка одобрена автор Sarah Westberg

До
После
Без изменений

Шаг Линий

-[* black] Turn the drone back over so that it is right side up.
-[* red] Remove the 2 3.5mm J000 head screws from the drone arm being replaced.
+[* black] Turn the drone back over so that it is right-side up.
+[* red] Remove the two 3.5mm J000 screws from the drone arm being replaced.