Возврат к шагу #5
Отредактированно Alex Diaz-Kokaisl -
Правка одобрена автор Alex Diaz-Kokaisl
- До
- После
- Без изменений
Шаг Линий
| [title] Remove the right screw | |
| [* red] Use a Phillips driver to remove the 3.8 mm screw securing the right Joy-Con sensor rail to the rear case. | |
| + | [* icon_note] To prevent these tight screws from [guide|13213|stripping], apply firm downward force, work slowly and try another JIS 000 or PH 000 driver if the screws won't come out. |