Возврат к шагу #17
Отредактированно Alex Diaz-Kokaisl -
Правка одобрена автор Alex Diaz-Kokaisl
- До
- После
- Без изменений
Шаг Линий
| - | [* icon_reminder] If desired, add a little blue threadlocker to the screw threads to prevent them from loosening over time. |
|---|---|
| - | [* icon_reminder] During reassembly, first install the hinge screws without tightening them fully. Then adjust the screen until it is correctly centered and aligned on each side. Finally, tighten the screws. |
| - | [* icon_reminder] If your screen clicks or snaps upon opening, loosen the hinge screws and adjust the alignment. Make sure the screen doesn't sit too far forward, or it can catch on the body when opening and closing. |
| + | [* icon_reminder] During reassembly, follow these instructions to align your screen hinges: |
| + | [* icon_note] If you have blue threadlocker, apply a drop to each screw's threads to prevent them from loosening over time. |
| + | [* black] Install the hinge screws without fully tightening them. Center the hinges and check for gaps or rubbing on either side. |
| + | [* black] Fully tighten the hinge screws. |
| + | [* black] If your screen clicks or snaps when it's opened or closed, loosen the screws and realign the screen. |