Почините Свои Вещи Сообщество Магазин

Возврат к шагу #6

Отредактированно Alex Diaz-Kokaisl -

Правка одобрена автор Alex Diaz-Kokaisl

До
После
Без изменений

Шаг Линий

-[* black] Tilt the right edge of the device upward to allow the isopropyl alcohol to work its way underneath the speaker.
-[* black] Hold for 1–2 minutes to allow time for the isopropyl alcohol to weaken the adhesive.
+[* black] Insert the tip of an opening pick in the gap between the speaker and the edge of the frame.
+[* black] Slide the opening pick along the edge of the speaker to slice the adhesive beneath it.