Перейти к основному содержанию

Возврат к шагу #11

Отредактированно iRobot -

Правка одобрена автор iRobot

До
После
Без изменений

Шаг Линий

[title] Cut the adhesive on the right edge
-[* black] Insert a plastic card at the bottom right corner of the battery.
+[* black] Insert a [product|IF145-101|plastic card] at the bottom right corner of the battery.
[* icon_caution] Take care not to puncture or bend the battery with your tool—a punctured or bent battery may leak dangerous chemicals or cause a thermal event.
[* icon_note] If at any point in this process the adhesive becomes very difficult to cut through, apply an iOpener to that area.