Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Возврат к шагу #1

Редактировать с помощью Claire Rapp -

Правка одобрена автор Claire Rapp

Удален
Добавлено
Без изменений

Шаг Линий

[* red] Three Pentalobe screws secure the battery to the upper case. They can be removed with [product|IF145-070|this special driver].
[* icon_note] If you don't have a Pentalobe driver, a 1.5 mm flathead screwdriver can be used in a pinch. Be sure the head of your flathead screwdriver fits snugly across two of the five "points" of the screw head before trying to break the screw free, as a loose fit will easily strip the screw head.
[* icon_note]
If the head of your screwdriver fits too loosely, find a bigger bit and file it down until it fits snugly before proceeding.
[* icon_note] If you don't have a Pentalobe driver, a 1.5 mm flathead screwdriver can be used in a pinch. Be sure the head of your flathead screwdriver fits snugly across two of the five "points" of the screw head before trying to break the screw free, as a loose fit will easily strip the screw head.
[* icon_note]
If the head of your screwdriver fits too loosely, find a bigger bit and file it down until it fits snugly before proceeding.
[* icon_note] You do not necessarily have to follow steps 3-7 to remove the battery in order to replace the hard drive. However, it is recommended to remove all power sources from electronics before working on them.