Перейти к основному содержанию

Возврат к шагу #4

Редактировать с помощью Sam Goldheart -

Правка одобрена автор Sam Goldheart

До
После
Без изменений

Шаг Линий

-[* black] Insert wisdom here.
+[* black] Walk the camera cable connector out of its socket with the tip of a spudger.
+[* black] Pull the camera cable parallel to the face of the I/O board toward the front edge of the Air to disconnect it from its socket.
+[* icon_caution] Do not lift upward on this cable as you disconnect it, as its socket may break off the logic board.